DepartmentAdd

Adds a department.


Request

Response

XMLOPS

VB.NET

C#

Tag Type Max length Implementation Required

IDepartmentAdd

Adds a department.
        

defMacro

You use a macro in a request message set if you need to create some object in one request, then refer to it in a subsequent request within that same message set. For example, you could create an inventory item and then include that item as a line item in a sales order all in one request message set, rather than create the item, query for it, then include it in a separate SalesOrderAdd request. In this latter case, you are accessing QBPOS three times, versus only once, using macros. The item to be referenced is specified via the defmacro. The actual reference to that item in the succeeding request is done via the use macro, as follows: ItemInventoryAdd defMacro=”ListID:Inv1” In the above line, you simply replace Inv1 with the name you want to give the macro. When you reference this macro in another request (one that requires that object’s listID) in the same message set, you use this syntax: ListID useMacro=”ListID:Inv1” This is covered in more detail in the Programming Guide.
 IQBStringType   2.0  

DefaultMarginPercent

If you want, you can enter a default margin percentage for use with a pricing formula. If you do not wish QBPOS to calculate prices for new items as they are added to inventory, leave this field and the DefaultMarkupPercent field at 0.
 IQBIntType      

DefaultMarkupPercent

Instead of the default margin, you can use the markup percentage as an alternate way to display your desired profit margin, by marking up from item cost. Entering either a margin or a markup will display an automatic calculation in the other field.
 IQBIntType      

DepartmentCode

Enter a unique 1-3 character code, identifying the department. The first character usually indicates the broadest classification. The department code can be used when defining an item in inventory.
 IQBStringType 3 chars   Y

DepartmentName

The name for the department.
 IQBStringType 30 chars    

TaxCode

In the QBPOS UI, you specify sales tax behavior by creating sales tax locations and tax codes. (What the QBPOS UI calls a “tax location” is what the SDK calls a “tax category”.) The tax code and its name is shared between all tax categories (locations): that is, all tax categories will have the same set of tax codes. However, the actual tax rate(s) that are used in a given tax code can vary from one tax category to the next. The tax code rates that are actually applied at transaction time are those that are in the tax category that is currently specified as the default tax category (location) in sales tax preferences. You create and modify tax categories and tax codes using the TaxCategoryAdd/Mod and TaxCodeAdd/Mod requests respectively. You assign tax code rates to a tax code within a tax category using the TaxRecordMod request. You query for the tax preference information (tax rate information for each tax code under each tax category) using the CompanyQuery. However, currently the default tax category (location) can be specified only within the QBPOS UI. When you create or modify an inventory item in QBPOS, you apply a tax code to it, but not a tax category. At sales transaction time, the actual sales tax is calculated for each item, based on the tax code assigned to that item and the tax code rate(s) for that tax code under the tax category currently specified as the default tax category (location).
 IQBStringType      

IncludeRetElementList

You can use the IncludeRetElement feature to restrict the data returned in the response to the specified qbposXML field here. If you do this, only those elements specified will be returned. To use this feature, you simply add the qbposXML element name to the IncludeRetElementList. The following example shows how to do this, specifying that only the CreatedBy and ClockOutTime elements are to be returned in the TimeEntryAdd response: Dim MyTimeEntry As ITimeEntryAdd Set MyTimeEntry = requestMsgSet.AppendTimeEntryAddRq MyTimeEntry.IncludeRetElementList.Add “CreatedBy” MyTimeEntry.IncludeRetElementList.Add “ClockOutTime” ‘ set the other properties as desired…
 IBSTRList 50 chars 2.0  
Tag Type Max length Implementation Required

IResponse

Adds a department.
        

StatusCode

A number that corresponds to a statusSeverity and statusMessage. Five status codes relate directly to signon messages: 2000, 2010, 2020, 2030, and 2040. For details about these and other statusCode values that can be returned, see the statusCode table on the Error Codes page.
 IQBIntType     Y

StatusSeverity

One of the following values: INFO The request was completed, and the results are consistent with what your application expected. WARNING The request was completed, but the results might not be consistent with what you expected. ERROR The request was not completed. No data will appear in the server’s response after the statusMessage.
 IQBStringType     Y

StatusMessage

A user-readable explanation of the success or error condition that is indicated by the statusCode. For details about the statusMessage values that can be returned, see the “Explanation” column of the statusCode table on the Error Codes page.
 IQBStringType     Y

Detail

 IDepartmentRet      

ListID

The unique ID returned by QBPOS for this object. If supplied in a request, the ListID is a reference to an object required in the request. For example, in a SalesOrder or PurchaseOrder line item, the ListID that is required is an Item list ID.
 IQBIDType      

TimeCreated

The timestamp indicating the time when this object was created in QBPOS.
 IQBDateTimeType   1.1  

TimeModified

The time when the object was modified by QBPOS.
 IQBDateTimeType      

DefaultMarginPercent

If you want, you can enter a default margin percentage for use with a pricing formula. If you do not wish QBPOS to calculate prices for new items as they are added to inventory, leave this field and the DefaultMarkupPercent field at 0.
 IQBIntType      

DefaultMarkupPercent

Instead of the default margin, you can use the markup percentage as an alternate way to display your desired profit margin, by marking up from item cost. Entering either a margin or a markup will display an automatic calculation in the other field.
 IQBIntType      

DepartmentCode

Enter a unique 1-3 character code, identifying the department. The first character usually indicates the broadest classification. The department code can be used when defining an item in inventory.
 IQBStringType 3 chars    

DepartmentName

The name for the department.
 IQBStringType 30 chars    

StoreExchangeStatus

In multi store configurations, if the customer’s information has changed, this information is updated at the headquarters store. This response field indicates whether the information was successfully updated or not.
 IQBENStoreExchangeStatusType      

TaxCode

In the QBPOS UI, you specify sales tax behavior by creating sales tax locations and tax codes. (What the QBPOS UI calls a “tax location” is what the SDK calls a “tax category”.) The tax code and its name is shared between all tax categories (locations): that is, all tax categories will have the same set of tax codes. However, the actual tax rate(s) that are used in a given tax code can vary from one tax category to the next. The tax code rates that are actually applied at transaction time are those that are in the tax category that is currently specified as the default tax category (location) in sales tax preferences. You create and modify tax categories and tax codes using the TaxCategoryAdd/Mod and TaxCodeAdd/Mod requests respectively. You assign tax code rates to a tax code within a tax category using the TaxRecordMod request. You query for the tax preference information (tax rate information for each tax code under each tax category) using the CompanyQuery. However, currently the default tax category (location) can be specified only within the QBPOS UI. When you create or modify an inventory item in QBPOS, you apply a tax code to it, but not a tax category. At sales transaction time, the actual sales tax is calculated for each item, based on the tax code assigned to that item and the tax code rate(s) for that tax code under the tax category currently specified as the default tax category (location).
 IQBStringType      

DataExtRetList

If you specify any custom fields/private data extensions to be returned in the query request (in the OwnerIDList), then this Ret List will contain all of the data extensions that belong to each specified OwnerID. For example, if you specify an OwnerID value of 0 (custom fields), then the query will return all custom data for the returned records.
 IDataExtRetList   1.2  

(List of IDataExtRet Objects)

        

OwnerID

OwnerID refers to the owner of a data extension, and must be 0 or a valid GUID. (Custom fields, which are visible in the QuickBooks UI, always have an OwnerID of 0. ) Usually you would keep your application’s GUID confidential to prevent other applications from accessing your data extensions. But if you want to share data extensions with another application, the applications need to use the same GUID. In this case, each application could use two GUIDs, one for shared data extensions and one for confidential data extensions. (An application can have any number of GUIDs.) When you share a data extension with another application, the other application must know both the OwnerID and the DataExtName, as these together form a data extension’s unique name.
 IQBGUIDType     Y

DataExtName

The name of the data extension. If this is a custom field, DataExtName will be visible as a label in the QuickBooks user interface. Also because OwnerID and DataExtName together make the data extension unique, and because custom fields all have the same OwnerID of zero, the DataExtName must be a unique value among existing custom fields. In contrast, the DataExtName for private data extensions must be unique only for the specified OwnerID GUID.
 IQBStringType     Y

DataExtType

b>DataExtType The type of the data extension.
 IQBENDataExtTypeType     Y

DataExtValue

The data in this field. The maximum length of DataExtValue will depend on the DataExtType of this data extension. For example, if DataExtType is STR255TYPE, the maximum length of DataExtValue is 255 characters. If DataExtType is STR1024TYPE, the maximum size of DataExtValue is 1KB.
 IQBStringType     Y 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
<?xml version="1.0" encoding="utf-8"?>
<?qbposxml version="4.0"?>
<QBPOSXML>
        <QBPOSXMLMsgsRq onError="stopOnError">
                <DepartmentAddRq>
                        <DepartmentAdd defMacro="MACROTYPE"> <!-- required -->
                                <DefaultMarginPercent >INTTYPE</DefaultMarginPercent> <!-- optional -->
                                <DefaultMarkupPercent >INTTYPE</DefaultMarkupPercent> <!-- optional -->
                                <DepartmentCode >STRTYPE</DepartmentCode> <!-- required -->
                                <DepartmentName >STRTYPE</DepartmentName> <!-- optional -->
                                <TaxCode >STRTYPE</TaxCode> <!-- optional -->
                        </DepartmentAdd>
                        <IncludeRetElement >STRTYPE</IncludeRetElement> <!-- optional, may repeat -->
                </DepartmentAddRq>

                <DepartmentAddRs statusCode="INTTYPE" statusSeverity="STRTYPE" statusMessage="STRTYPE">
                        <DepartmentRet> <!-- optional -->
                                <ListID >IDTYPE</ListID> <!-- optional -->
                                <TimeCreated >DATETIMETYPE</TimeCreated> <!-- optional -->
                                <TimeModified >DATETIMETYPE</TimeModified> <!-- optional -->
                                <DefaultMarginPercent >INTTYPE</DefaultMarginPercent> <!-- optional -->
                                <DefaultMarkupPercent >INTTYPE</DefaultMarkupPercent> <!-- optional -->
                                <DepartmentCode >STRTYPE</DepartmentCode> <!-- optional -->
                                <DepartmentName >STRTYPE</DepartmentName> <!-- optional -->
                                <!-- StoreExchangeStatus may have one of the following values: Modified, Sent, Acknowledged -->
                                <StoreExchangeStatus >ENUMTYPE</StoreExchangeStatus> <!-- optional -->
                                <TaxCode >STRTYPE</TaxCode> <!-- optional -->
                                <DataExtRet> <!-- optional, may repeat -->
                                        <OwnerID >GUIDTYPE</OwnerID> <!-- required -->
                                        <DataExtName >STRTYPE</DataExtName> <!-- required -->
                                        <!-- DataExtType may have one of the following values: INTTYPE, AMTTYPE, PRICETYPE, QUANTYPE, PERCENTTYPE, DATETIMETYPE, STR255TYPE, STR1024TYPE -->
                                        <DataExtType >ENUMTYPE</DataExtType> <!-- required -->
                                        <DataExtValue >STRTYPE</DataExtValue> <!-- required -->
                                </DataExtRet>
                        </DepartmentRet>
                </DepartmentAddRs>
        </QBPOSXMLMsgsRq>
</QBPOSXML>


  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
'The following sample code is generated as an illustration of
'Creating requests and parsing responses ONLY
'This code is NOT intended to show best practices or ideal code
'Use at your most careful discretion

imports System
imports System.Net
imports System.Drawing
imports System.Collections
imports System.ComponentModel
imports System.Windows.Forms
imports System.Data
imports System.IO
imports Interop.qbposfc4

        Public Class SampleDepartmentAdd
                Public Sub  DoDepartmentAdd()
                        Dim sessionBegun as Boolean
                        sessionBegun = False
                        Dim connectionOpen as Boolean
                        connectionOpen = False
                        Dim sessionManager as QBPOSSessionManager
                        sessionManager = nothing

                        Try
                                'Create the session Manager object
                                sessionManager = new QBPOSSessionManager

                                'Create the message set request object to hold our request
                                Dim requestMsgSet as IMsgSetRequest
                                requestMsgSet = sessionManager.CreateMsgSetRequest(4,0)
                                requestMsgSet.Attributes.OnError = ENRqOnError.roeContinue

                                BuildDepartmentAddRq(requestMsgSet)

                                'Connect to QuickBooks and begin a session
                                sessionManager.OpenConnection("","Sample Code from OSR")
                                connectionOpen = True
                                sessionManager.BeginSession("")
                                sessionBegun = True

                                'Send the request and get the response from QuickBooks
                                Dim responseMsgSet as IMsgSetResponse
                                responseMsgSet = sessionManager.DoRequests(requestMsgSet)

                                'End the session and close the connection to QuickBooks
                                sessionManager.EndSession()
                                sessionBegun = False
                                sessionManager.CloseConnection()
                                connectionOpen = False

                                WalkDepartmentAddRs(responseMsgSet)
                        Catch e as Exception
                                MessageBox.Show(e.Message, "Error")
                                if (sessionBegun) then
                                        sessionManager.EndSession()
                                End If
                                if (connectionOpen) then
                                        sessionManager.CloseConnection()
                                End If
                        End Try
                End Sub
                Public Sub BuildDepartmentAddRq(requestMsgSet as IMsgSetRequest)
                        Dim DepartmentAddRq as IDepartmentAdd
                        DepartmentAddRq= requestMsgSet.AppendDepartmentAddRq()
                        'Set field value for DefaultMarginPercent
                        DepartmentAddRq.DefaultMarginPercent.SetValue(6)
                        'Set field value for DefaultMarkupPercent
                        DepartmentAddRq.DefaultMarkupPercent.SetValue(6)
                        'Set field value for DepartmentCode
                        DepartmentAddRq.DepartmentCode.SetValue("ab")
                        'Set field value for DepartmentName
                        DepartmentAddRq.DepartmentName.SetValue("ab")
                        'Set field value for TaxCode
                        DepartmentAddRq.TaxCode.SetValue("ab")
                        'Set field value for IncludeRetElementList
                        'May create more than one of these if needed
                        DepartmentAddRq.IncludeRetElementList.Add("ab")
                End Sub




                Public Sub WalkDepartmentAddRs( responseMsgSet as IMsgSetResponse)
                        if (responseMsgSet is nothing) then
                                Exit Sub
                        End If

                        Dim responseList as IResponseList
                        responseList = responseMsgSet.ResponseList
                        if (responseList is nothing) then
                                Exit Sub
                        End If

                        'if we sent only one request, there is only one response, we'll walk the list for this sample
                        for j=0 to responseList.Count-1
                                Dim response as IResponse
                                response = responseList.GetAt(j)
                                'check the status code of the response, 0=ok, >0 is warning
                                if (response.StatusCode >= 0) then
                                        'the request-specific response is in the details, make sure we have some
                                        if (not response.Detail is nothing) then
                                                'make sure the response is the type we're expecting
                                                Dim responseType as ENResponseType
                                                responseType = CType(response.Type.GetValue(),ENResponseType)
                                                if (responseType = ENResponseType.rtDepartmentAddRs) then
                                                        'upcast to more specific type here, this is safe because we checked with response.Type check above
                                                        Dim DepartmentRet as IDepartmentRet
                                                        DepartmentRet = CType(response.Detail,IDepartmentRet)
                                                                WalkDepartmentRet(DepartmentRet)
                                                End If
                                        End If
                                End If
                        Next j
                End Sub




                Public Sub WalkDepartmentRet(DepartmentRet as IDepartmentRet)
                        if (DepartmentRet is nothing) then
                                Exit Sub
                        End If

                        'Go through all the elements of IDepartmentRet
                        'Get value of ListID
                        if ( not DepartmentRet.ListID is nothing) then
                                Dim ListID603 as String
                                ListID603 = DepartmentRet.ListID.GetValue()
                        End If
                        'Get value of TimeCreated
                        if ( not DepartmentRet.TimeCreated is nothing) then
                                Dim TimeCreated604 as DateTime
                                TimeCreated604 = DepartmentRet.TimeCreated.GetValue()
                        End If
                        'Get value of TimeModified
                        if ( not DepartmentRet.TimeModified is nothing) then
                                Dim TimeModified605 as DateTime
                                TimeModified605 = DepartmentRet.TimeModified.GetValue()
                        End If
                        'Get value of DefaultMarginPercent
                        if ( not DepartmentRet.DefaultMarginPercent is nothing) then
                                Dim DefaultMarginPercent606 as Integer
                                DefaultMarginPercent606 = DepartmentRet.DefaultMarginPercent.GetValue()
                        End If
                        'Get value of DefaultMarkupPercent
                        if ( not DepartmentRet.DefaultMarkupPercent is nothing) then
                                Dim DefaultMarkupPercent607 as Integer
                                DefaultMarkupPercent607 = DepartmentRet.DefaultMarkupPercent.GetValue()
                        End If
                        'Get value of DepartmentCode
                        if ( not DepartmentRet.DepartmentCode is nothing) then
                                Dim DepartmentCode608 as String
                                DepartmentCode608 = DepartmentRet.DepartmentCode.GetValue()
                        End If
                        'Get value of DepartmentName
                        if ( not DepartmentRet.DepartmentName is nothing) then
                                Dim DepartmentName609 as String
                                DepartmentName609 = DepartmentRet.DepartmentName.GetValue()
                        End If
                        'Get value of StoreExchangeStatus
                        if ( not DepartmentRet.StoreExchangeStatus is nothing) then
                                Dim StoreExchangeStatus610 as ENStoreExchangeStatus
                                StoreExchangeStatus610 = DepartmentRet.StoreExchangeStatus.GetValue()
                        End If
                        'Get value of TaxCode
                        if ( not DepartmentRet.TaxCode is nothing) then
                                Dim TaxCode611 as String
                                TaxCode611 = DepartmentRet.TaxCode.GetValue()
                        End If
                        if (not DepartmentRet.DataExtRetList is nothing)
                                Dim i612 as Integer
                                for i612 = 0  to DepartmentRet.DataExtRetList.Count - 1
                                        Dim DataExtRet as IDataExtRet
                                        DataExtRet = DepartmentRet.DataExtRetList.GetAt(i612)
                                        'Get value of OwnerID
                                        Dim OwnerID613 as String
                                        OwnerID613 = DataExtRet.OwnerID.GetValue()
                                        'Get value of DataExtName
                                        Dim DataExtName614 as String
                                        DataExtName614 = DataExtRet.DataExtName.GetValue()
                                        'Get value of DataExtType
                                        Dim DataExtType615 as ENDataExtType
                                        DataExtType615 = DataExtRet.DataExtType.GetValue()
                                        'Get value of DataExtValue
                                        Dim DataExtValue616 as String
                                        DataExtValue616 = DataExtRet.DataExtValue.GetValue()
                                Next i612
                        End If
                End Sub




        End Class


  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
//The following sample code is generated as an illustration of
//Creating requests and parsing responses ONLY
//This code is NOT intended to show best practices or ideal code
//Use at your most careful discretion

using System;
using System.Net;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using Interop.qbposfc4;

namespace com.intuit.idn.samples
{
        public class SampleDepartmentAdd
        {
                public void  DoDepartmentAdd()
                {
                        bool sessionBegun = false;
                        bool connectionOpen = false;
                        QBPOSSessionManager sessionManager = null;

                        try
                        {
                                //Create the session Manager object
                                sessionManager = new QBPOSSessionManager();

                                //Create the message set request object to hold our request
                                IMsgSetRequest requestMsgSet = sessionManager.CreateMsgSetRequest(4,0);
                                requestMsgSet.Attributes.OnError = ENRqOnError.roeContinue;

                                BuildDepartmentAddRq(requestMsgSet);

                                //Connect to QuickBooks and begin a session
                                sessionManager.OpenConnection("","Sample Code from OSR");
                                connectionOpen = true;
                                sessionManager.BeginSession("");
                                sessionBegun = true;

                                //Send the request and get the response from QuickBooks
                                IMsgSetResponse responseMsgSet = sessionManager.DoRequests(requestMsgSet);

                                //End the session and close the connection to QuickBooks
                                sessionManager.EndSession();
                                sessionBegun = false;
                                sessionManager.CloseConnection();
                                connectionOpen = false;

                                WalkDepartmentAddRs(responseMsgSet);
                        }
                        catch (Exception e)
                        {
                                MessageBox.Show(e.Message, "Error");
                                if (sessionBegun)
                                {
                                        sessionManager.EndSession();
                                }
                                if (connectionOpen)
                                {
                                        sessionManager.CloseConnection();
                                }
                        }
                }
                void BuildDepartmentAddRq(IMsgSetRequest requestMsgSet)
                {
                        IDepartmentAdd DepartmentAddRq= requestMsgSet.AppendDepartmentAddRq();
                        //Set attributes
                        //Set field value for defMacro
                        DepartmentAddRq.defMacro.SetValue("IQBStringType");
                        //Set field value for DefaultMarginPercent
                        DepartmentAddRq.DefaultMarginPercent.SetValue(6);
                        //Set field value for DefaultMarkupPercent
                        DepartmentAddRq.DefaultMarkupPercent.SetValue(6);
                        //Set field value for DepartmentCode
                        DepartmentAddRq.DepartmentCode.SetValue("ab");
                        //Set field value for DepartmentName
                        DepartmentAddRq.DepartmentName.SetValue("ab");
                        //Set field value for TaxCode
                        DepartmentAddRq.TaxCode.SetValue("ab");
                        //Set field value for IncludeRetElementList
                        //May create more than one of these if needed
                        DepartmentAddRq.IncludeRetElementList.Add("ab");
                }




                void WalkDepartmentAddRs(IMsgSetResponse responseMsgSet)
                {
                        if (responseMsgSet == null) return;
                        IResponseList responseList = responseMsgSet.ResponseList;
                        if (responseList == null) return;
                        //if we sent only one request, there is only one response, we'll walk the list for this sample
                        for(int i=0; i < responseList.Count; i++)
                        {
                                IResponse response = responseList.GetAt(i);
                                //check the status code of the response, 0=ok, >0 is warning
                                if (response.StatusCode >= 0)
                                {
                                        //the request-specific response is in the details, make sure we have some
                                        if (response.Detail != null)
                                        {
                                                //make sure the response is the type we're expecting
                                                ENResponseType responseType = (ENResponseType)response.Type.GetValue();
                                                if (responseType == ENResponseType.rtDepartmentAddRs)
                                                {
                                                        //upcast to more specific type here, this is safe because we checked with response.Type check above
                                                        IDepartmentRet DepartmentRet = (IDepartmentRet)response.Detail;
                                                                WalkDepartmentRet(DepartmentRet);
                                                }
                                        }
                                }
                        }
                }




                void WalkDepartmentRet(IDepartmentRet DepartmentRet)
                {
                        if (DepartmentRet == null) return;
                        //Go through all the elements of IDepartmentRet
                        //Get value of ListID
                        if (DepartmentRet.ListID != null)
                        {
                                string ListID617 = (string)DepartmentRet.ListID.GetValue();
                        }
                        //Get value of TimeCreated
                        if (DepartmentRet.TimeCreated != null)
                        {
                                DateTime TimeCreated618 = (DateTime)DepartmentRet.TimeCreated.GetValue();
                        }
                        //Get value of TimeModified
                        if (DepartmentRet.TimeModified != null)
                        {
                                DateTime TimeModified619 = (DateTime)DepartmentRet.TimeModified.GetValue();
                        }
                        //Get value of DefaultMarginPercent
                        if (DepartmentRet.DefaultMarginPercent != null)
                        {
                                int DefaultMarginPercent620 = (int)DepartmentRet.DefaultMarginPercent.GetValue();
                        }
                        //Get value of DefaultMarkupPercent
                        if (DepartmentRet.DefaultMarkupPercent != null)
                        {
                                int DefaultMarkupPercent621 = (int)DepartmentRet.DefaultMarkupPercent.GetValue();
                        }
                        //Get value of DepartmentCode
                        if (DepartmentRet.DepartmentCode != null)
                        {
                                string DepartmentCode622 = (string)DepartmentRet.DepartmentCode.GetValue();
                        }
                        //Get value of DepartmentName
                        if (DepartmentRet.DepartmentName != null)
                        {
                                string DepartmentName623 = (string)DepartmentRet.DepartmentName.GetValue();
                        }
                        //Get value of StoreExchangeStatus
                        if (DepartmentRet.StoreExchangeStatus != null)
                        {
                                ENStoreExchangeStatus StoreExchangeStatus624 = (ENStoreExchangeStatus)DepartmentRet.StoreExchangeStatus.GetValue();
                        }
                        //Get value of TaxCode
                        if (DepartmentRet.TaxCode != null)
                        {
                                string TaxCode625 = (string)DepartmentRet.TaxCode.GetValue();
                        }
                        if (DepartmentRet.DataExtRetList != null)
                        {
                                for (int i626 = 0; i626 < DepartmentRet.DataExtRetList.Count; i626++)
                                {
                                        IDataExtRet DataExtRet = DepartmentRet.DataExtRetList.GetAt(i626);
                                        //Get value of OwnerID
                                        string OwnerID627 = (string)DataExtRet.OwnerID.GetValue();
                                        //Get value of DataExtName
                                        string DataExtName628 = (string)DataExtRet.DataExtName.GetValue();
                                        //Get value of DataExtType
                                        ENDataExtType DataExtType629 = (ENDataExtType)DataExtRet.DataExtType.GetValue();
                                        //Get value of DataExtValue
                                        string DataExtValue630 = (string)DataExtRet.DataExtValue.GetValue();
                                }
                        }
                }




        }
}