ListDel

Deletes the specified object from QBPOS.


Request

Response

XMLOPS

VB.NET

C#

Tag Type Max length Implementation Required

IListDel

Deletes the specified object from QBPOS.
        

ListDelType

The type of list from which a list member is being deleted or has been deleted.
 IQBENListDelTypeType     Y

ListID

The unique ID returned by QBPOS for this object. If supplied in a request, the ListID is a reference to an object required in the request. For example, in a SalesOrder or PurchaseOrder line item, the ListID that is required is an Item list ID.
 IQBIDType     Y
Tag Type Max length Implementation Required

IResponse

Deletes the specified object from QBPOS.
        

StatusCode

A number that corresponds to a statusSeverity and statusMessage. Five status codes relate directly to signon messages: 2000, 2010, 2020, 2030, and 2040. For details about these and other statusCode values that can be returned, see the statusCode table on the Error Codes page.
 IQBIntType     Y

StatusSeverity

One of the following values: INFO The request was completed, and the results are consistent with what your application expected. WARNING The request was completed, but the results might not be consistent with what you expected. ERROR The request was not completed. No data will appear in the server’s response after the statusMessage.
 IQBStringType     Y

StatusMessage

A user-readable explanation of the success or error condition that is indicated by the statusCode. For details about the statusMessage values that can be returned, see the “Explanation” column of the statusCode table on the Error Codes page.
 IQBStringType     Y

ListDelType

The type of list from which a list member is being deleted or has been deleted.
 IQBENListDelTypeType      

ListID

The unique ID returned by QBPOS for this object. If supplied in a request, the ListID is a reference to an object required in the request. For example, in a SalesOrder or PurchaseOrder line item, the ListID that is required is an Item list ID.
 IQBIDType      

TimeDeleted

Timestamp marking the date/time when QBPOS successfully deleted the object.
 IQBDateTimeType      

FullName

Full name of the entity, for example customer or vendor fullname.
 IQBStringType       

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
<?xml version="1.0" encoding="utf-8"?>
<?qbposxml version="4.0"?>
<QBPOSXML>
        <QBPOSXMLMsgsRq onError="stopOnError">
                <ListDelRq>
                        <!-- ListDelType may have one of the following values: Department, Customer, Vendor, Employee, ItemInventory, SalesOrder, PurchaseOrder, TimeEntry, TaxCategory, TaxCode, HeldSalesReceipt, HeldVoucher, HeldInventoryQtyAdjustment, HeldInventoryCostAdjustment, HeldTransferSlip -->
                        <ListDelType >ENUMTYPE</ListDelType> <!-- required -->
                        <ListID >IDTYPE</ListID> <!-- required -->
                </ListDelRq>

                <ListDelRs statusCode="INTTYPE" statusSeverity="STRTYPE" statusMessage="STRTYPE">
                        <!-- ListDelType may have one of the following values: Department, Customer, Vendor, Employee, ItemInventory, SalesOrder, PurchaseOrder, TimeEntry, TaxCategory, TaxCode, HeldSalesReceipt, HeldVoucher, HeldInventoryQtyAdjustment, HeldInventoryCostAdjustment, HeldTransferSlip -->
                        <ListDelType >ENUMTYPE</ListDelType> <!-- optional -->
                        <ListID >IDTYPE</ListID> <!-- optional -->
                        <TimeDeleted >DATETIMETYPE</TimeDeleted> <!-- optional -->
                        <FullName >STRTYPE</FullName> <!-- optional -->
                </ListDelRs>
        </QBPOSXMLMsgsRq>
</QBPOSXML>


  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
'The following sample code is generated as an illustration of
'Creating requests and parsing responses ONLY
'This code is NOT intended to show best practices or ideal code
'Use at your most careful discretion

imports System
imports System.Net
imports System.Drawing
imports System.Collections
imports System.ComponentModel
imports System.Windows.Forms
imports System.Data
imports System.IO
imports Interop.qbposfc4

        Public Class SampleListDel
                Public Sub  DoListDel()
                        Dim sessionBegun as Boolean
                        sessionBegun = False
                        Dim connectionOpen as Boolean
                        connectionOpen = False
                        Dim sessionManager as QBPOSSessionManager
                        sessionManager = nothing

                        Try
                                'Create the session Manager object
                                sessionManager = new QBPOSSessionManager

                                'Create the message set request object to hold our request
                                Dim requestMsgSet as IMsgSetRequest
                                requestMsgSet = sessionManager.CreateMsgSetRequest(4,0)
                                requestMsgSet.Attributes.OnError = ENRqOnError.roeContinue

                                BuildListDelRq(requestMsgSet)

                                'Connect to QuickBooks and begin a session
                                sessionManager.OpenConnection("","Sample Code from OSR")
                                connectionOpen = True
                                sessionManager.BeginSession("")
                                sessionBegun = True

                                'Send the request and get the response from QuickBooks
                                Dim responseMsgSet as IMsgSetResponse
                                responseMsgSet = sessionManager.DoRequests(requestMsgSet)

                                'End the session and close the connection to QuickBooks
                                sessionManager.EndSession()
                                sessionBegun = False
                                sessionManager.CloseConnection()
                                connectionOpen = False

                                WalkListDelRs(responseMsgSet)
                        Catch e as Exception
                                MessageBox.Show(e.Message, "Error")
                                if (sessionBegun) then
                                        sessionManager.EndSession()
                                End If
                                if (connectionOpen) then
                                        sessionManager.CloseConnection()
                                End If
                        End Try
                End Sub
                Public Sub BuildListDelRq(requestMsgSet as IMsgSetRequest)
                        Dim ListDelRq as IListDel
                        ListDelRq= requestMsgSet.AppendListDelRq()
                        'Set field value for ListDelType
                        ListDelRq.ListDelType.SetValue(ENListDelType.ldtDepartment)
                        'Set field value for ListID
                        ListDelRq.ListID.SetValue("200000-1011023419")
                End Sub




                Public Sub WalkListDelRs( responseMsgSet as IMsgSetResponse)
                        if (responseMsgSet is nothing) then
                                Exit Sub
                        End If

                        Dim responseList as IResponseList
                        responseList = responseMsgSet.ResponseList
                        if (responseList is nothing) then
                                Exit Sub
                        End If

                        'if we sent only one request, there is only one response, we'll walk the list for this sample
                        for j=0 to responseList.Count-1
                                Dim response as IResponse
                                response = responseList.GetAt(j)
                                'check the status code of the response, 0=ok, >0 is warning
                                if (response.StatusCode >= 0) then
                                        'the request-specific response is in the details, make sure we have some
                                        if (not response.Detail is nothing) then
                                                'make sure the response is the type we're expecting
                                                Dim responseType as ENResponseType
                                                responseType = CType(response.Type.GetValue(),ENResponseType)
                                                if (responseType = ENResponseType.rtListDelRs) then
                                                        'upcast to more specific type here, this is safe because we checked with response.Type check above
                                                        Dim ListDelType as IQBENListDelTypeType
                                                        ListDelType = CType(response.Detail,IQBENListDelTypeType)
                                                                WalkListDelType(ListDelType)
                                                End If
                                        End If
                                End If
                        Next j
                End Sub




                Public Sub WalkListDelType(ListDelType as IQBENListDelTypeType)
                        if (ListDelType is nothing) then
                                Exit Sub
                        End If

                        'Go through all the elements of IQBENListDelTypeType
                End Sub




        End Class


  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
//The following sample code is generated as an illustration of
//Creating requests and parsing responses ONLY
//This code is NOT intended to show best practices or ideal code
//Use at your most careful discretion

using System;
using System.Net;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using Interop.qbposfc4;

namespace com.intuit.idn.samples
{
        public class SampleListDel
        {
                public void  DoListDel()
                {
                        bool sessionBegun = false;
                        bool connectionOpen = false;
                        QBPOSSessionManager sessionManager = null;

                        try
                        {
                                //Create the session Manager object
                                sessionManager = new QBPOSSessionManager();

                                //Create the message set request object to hold our request
                                IMsgSetRequest requestMsgSet = sessionManager.CreateMsgSetRequest(4,0);
                                requestMsgSet.Attributes.OnError = ENRqOnError.roeContinue;

                                BuildListDelRq(requestMsgSet);

                                //Connect to QuickBooks and begin a session
                                sessionManager.OpenConnection("","Sample Code from OSR");
                                connectionOpen = true;
                                sessionManager.BeginSession("");
                                sessionBegun = true;

                                //Send the request and get the response from QuickBooks
                                IMsgSetResponse responseMsgSet = sessionManager.DoRequests(requestMsgSet);

                                //End the session and close the connection to QuickBooks
                                sessionManager.EndSession();
                                sessionBegun = false;
                                sessionManager.CloseConnection();
                                connectionOpen = false;

                                WalkListDelRs(responseMsgSet);
                        }
                        catch (Exception e)
                        {
                                MessageBox.Show(e.Message, "Error");
                                if (sessionBegun)
                                {
                                        sessionManager.EndSession();
                                }
                                if (connectionOpen)
                                {
                                        sessionManager.CloseConnection();
                                }
                        }
                }
                void BuildListDelRq(IMsgSetRequest requestMsgSet)
                {
                        IListDel ListDelRq= requestMsgSet.AppendListDelRq();
                        //Set field value for ListDelType
                        ListDelRq.ListDelType.SetValue(ENListDelType.ldtDepartment);
                        //Set field value for ListID
                        ListDelRq.ListID.SetValue("200000-1011023419");
                }




                void WalkListDelRs(IMsgSetResponse responseMsgSet)
                {
                        if (responseMsgSet == null) return;
                        IResponseList responseList = responseMsgSet.ResponseList;
                        if (responseList == null) return;
                        //if we sent only one request, there is only one response, we'll walk the list for this sample
                        for(int i=0; i < responseList.Count; i++)
                        {
                                IResponse response = responseList.GetAt(i);
                                //check the status code of the response, 0=ok, >0 is warning
                                if (response.StatusCode >= 0)
                                {
                                        //the request-specific response is in the details, make sure we have some
                                        if (response.Detail != null)
                                        {
                                                //make sure the response is the type we're expecting
                                                ENResponseType responseType = (ENResponseType)response.Type.GetValue();
                                                if (responseType == ENResponseType.rtListDelRs)
                                                {
                                                        //upcast to more specific type here, this is safe because we checked with response.Type check above
                                                        IQBENListDelTypeType ListDelType = (IQBENListDelTypeType)response.Detail;
                                                                WalkListDelType(ListDelType);
                                                }
                                        }
                                }
                        }
                }




                void WalkListDelType(IQBENListDelTypeType ListDelType)
                {
                        if (ListDelType == null) return;
                        //Go through all the elements of IQBENListDelTypeType
                }




        }
}